Influence of reactive SF/sub x/ gases on electrode surfaces after electrical discharges under SF/sub 6/ atmosphere

C. Beyer, Holger Jenett, D. Klockow

IEEE Transactions on Dielectrics and Electrical Insulation · 2000 · 141 citations · 24 references

Concepts

Abstract

A simulation of different electrical discharges under SF/sub 6/ atmosphere with subsequent surface and depth profile analysis is employed to investigate the effects that the formed corrosive byproducts have on gas-insulated system (GIS) electrodes. Cu, Al and Ag electrodes were treated with sparks (in the range of 0.15 J/spark) in an SF/sub 6/ discharge cell under various conditions at the Institut fur Spektrochemie und Angewandte Spektroskopie (ISAS) in Dortmund. The same materials were exposed to SF/sub 6/ in a GIS test compartment in which partial discharge (PD) occurred (Itaipu, Brazil). The treated materials were analyzed with energy dispersive X-ray (EDX) in a scanning electron microscope, X-ray photoelectron spectroscopy and high frequency (HF) plasma secondary neutral mass spectrometry (SNMS). The SNMS depth profiles were calibrated in order to quantify that part of the corrosive gaseous products having reacted with the solid material. The analysis of the electrodes exposed to the stressed SF/sub 6/ atmosphere show surface reaction only in the topmost nm, whereas with sparks, sulfur (S) and especially fluorine (F) compounds are detected to /spl sim/40 /spl mu/m depths. A first comparison between surface analysis and Fourier transform infrared (FTIR) measurements of the reactive gaseous products indicates a correlation of SF/sub 6/ decomposition and the extent of electrode degradation.

References

24