Review of Fuel Pre-injection Studies in a High Speed Airflow

Viacheslav Vinogradov, Yurii Shikhman, Corin Segal

44th AIAA Aerospace Sciences Meeting and Exhibit · 2006 · 16 citations · 18 references

Concepts

Abstract

This paper presents a review of liquid jet-in-crossflow studies performed in Central Institute of Aviation Motors and University of Florida. Motivating the work is substantial interest in developing an efficient air breathing propulsion cycle operating above Mach 3.5 using conventional hydrocarbon fuels in a dual mode combustion ramjet configuration. Research involves liquid and, in selected cases, gaseous jets issued into high speed subsonic and supersonic free stream, in inlets and in the combustor’s insulator flows. The main feature of these studies was fuel injection from a wall orifice in a wake of a thin swept pylon at small relative dynamic pressures qjet/qair=0.6-1.5. The fuel injection scheme remains ones of the most challenging problems in supersonic aerodynamics including concerns of fuel injection with minimal impulse losses, efficient mixing of the fuel with the free stream, inlet/combustor interactions and flame stability. These fuel injection studies have investigated individual, pylon/injector geometry combinations, injection conditions and different injectants effects on fuel plume spray, impulse losses and mixing efficiency in inlet and combustor insulators. Nomenclature

References

18