2013 · 14 citations · 10 references
EngineeringElectrical EngineeringSystems EngineeringEnergy SystemsHeat TransferPower ElectronicsPhotovoltaic DevicesPower Electronics For Renewable EnergyPower System DesignRenewable Energy Power ConversionSolar CellsSolar Photovoltaic SystemsElectrothermal SimulationGrid-connected InvertersGrid-connected Photovoltaic SystemsInverter ModelingPhotovoltaic InvertersPhotovoltaic System ModelingSilicon CarbideSilicon Carbide Power Devices
This paper introduces a real field mission profile oriented design tool for the new generation of grid connected PV-inverters applications based on SiC-devices. The proposed design tool consists of a grid connected PV-inverter model, an ElectroThermal model, a converter safe operating area (SOA) model, a mission profile model and an the evaluation block. The PV-system model involves a three level bipolar switch neutral point clamped (3L-BS NPC) inverter connected to the three phase grid through a LCL-filter. Moreover, the SOA model calculates the required converter heatsink thermal impedance Z <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">th_H</sub> in order to perform in a safe mode for the whole operating range. Furthermore, the proposed design tool considers the mission profile (the measured solar irradiance and ambient temperature) from the real field where the converter will operate. Thus, a realistic loading of the converter devices is achieved. To consider one year real field measurements of the mission profile, an accurate long term simulation model is developed. The model predicts the junction and case temperature of the converter devices, for three different case scenarios. In the first case, a one year mission profile is used into the model with a sampling rate of five minutes. For the second and third case, a more detailed analysis is performed for one week mission profile (in the wintersummer time) with a sampling rate of 25 s. The simulation results shows the thermal loading distribution among the converter devices (MOSFET, IGBT+FD) in terms of junction (average, peak, ΔT) and case (average) temperature for all three simulation cases. Finally, the evaluation block is used to analyze the results in order to perform a thermal loading-based classification of the converter devices.
10
Design for reliability of power electronic systems
Huai Wang, Ke Ma, Frede Blaabjerg · 2012 · 309 citations
Engineering, Electrical Engineering, Systems Engineering +17
Towards next generation photovoltaic inverters
Yaosuo Xue, Kurthakoti C. Divya, Gerd Griepentrog et al. · 2011 · 146 citations