An introduction to local area networks

TLDR

High‑speed, low‑cost data transmission within a single building enables local area networks, which must address hardware organization and protocol design. The paper investigates how to organize LAN hardware for reliable, low‑cost high‑speed communication and which protocols to use to exploit LAN capabilities. The authors examine LAN–long‑haul interconnection and provide a detailed case study of the host computer interface hardware needed for a typical LAN.

Abstract

Within a restricted area such as a single building, or a small cluster of buildings, high-speed (greater than 1 Mbit/s) data transmission is available at a small fraction of the cost of obtaining comparable longhaul service from a tariffed common carrier. Local area networks use this low-east, high-speed transmission capabality as the basis for a general-purpose data transfer network. There are two basic issues in local area network design. First, how should the hardware realizing the network be organized to provide reliable high-speed communication at minimum cost? With the low cost of the raw transmission capability, care is required to keep the associated hardware costs correspondingly low. Second, what protocols should be used for the operation of the network? While many protocol problems are common to local area networks and long-haul networks such as the ARPANET, new protocols are required to exploit the extended capabilities of local area networks. This paper addresses these two basic issues. It also considers the interconnection of local area networks and long-haul networks and presents a case study which describes in detail the host computer interface hard-ware required for a typical local area network.