IEEE Transactions on Control Systems Technology · 1995 · 45 citations · 3 references
EngineeringMechanical EngineeringSystems EngineeringDynamical SystemsInternal Combustion EnginesSystem DynamicsControl SystemsControl TheoryEngine Control SystemsEngine ModelingEngine SystemsSpark-ignition EnginesAir-fuel RatioAir-fuel Ratio ControlElectronic Fuel InjectionFuel InjectionNonlinear Control ModelsSpark Ignition Engine PerformanceSpark-ignition Engine ModelingTest Bench Validation
This paper describes the improvements which can be made to a spark-ignition engine by extensive use of automatic control. Particular emphasis is placed on fast transient phases produced by simultaneous action on the throttle and the electronic fuel injection device. The aim is to achieve better performance for the fuel/air ratio regulation system, thereby improving engine efficiency and exhaust emission during these transient phases. The authors begin by presenting an average dynamic model of the intake manifold validated on an engine test bench and goes on to develop a closed-loop system controlling average pressure in the intake manifold using the reference tracking model method. The air supply control system is combined with a predictor to compensate for delays in the injection procedure. The paper concludes with a comparison between the results obtained using simulation and those obtained experimentally from the engine.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
3