IEEE Transactions on Circuits and Systems · 1983 · 86 citations · 4 references
EngineeringElectrical EngineeringCircuit TheoryMicroelectronicsSemiconductor DevicesCmos Circuit DesignCurrent-voltage CharacteristicsDistortion ControlField-effect TransistorsMetal-oxide-semiconductor Field-effect TransistorsVoltage RegulatorsDependent Source AnalysisDependent Source NetworksDynamic RangeLinear Dynamic RangeLinear RangeResistorsSaturationSaturation Region
Field‑effect transistors can act as voltage‑controlled resistors, but low drain‑to‑source voltage is required to avoid saturation and keep distortion minimal, even with drain‑to‑gate feedback. A circuit combining a dependent source and a FET achieves a voltage‑controlled resistance with a linear range at least an order of magnitude larger than conventional FET VCRs, while remaining stable and simple to implement.
Field-effect transistors (FET) can be used as voltage-controlled resistors, provided operation in the saturation region is avoided. However, to keep distortion low, the magnitude of the drain-to-source voltage must be kept low. This is true even when drain-to-gate feedback is applied to linearize the drain-current versus drain-to-source voltage characteristics. It is shown here that by employing a dependent source and a FET, a voltage-controlled resistance can be realized which has a linear range considerably greater (an order of magnitude or more) than other FET voltage-controlled resistances. The resulting circuit is stable and easy to implement.
4
A.M. Davis · Proceedings of the IEEE · 1983 · 206 citations
Fully integrated active RC filters in MOS technology
M. Banu, Y. Tsividis · 1983 · 24 citations