CMOS temperature sensor with ring oscillator for mobile DRAM self-refresh control

Chan-Kyung Kim, Bai‐Sun Kong, Chilgee Lee, Young-Hyun Jun

2008 · 38 citations · 6 references

Concepts

TL;DR

The sensor is highly area‑efficient, simple, and easy to implement on ICs compared to traditional bandgap reference temperature sensors. The study introduces a low‑cost CMOS temperature sensor to control the self‑refresh period of mobile DRAM. It generates a temperature‑dependent bias current from poly resistance and drives a ring oscillator to produce a digital temperature code. Fabricated in an 80 nm DRAM process, the sensor occupies only 0.016 mm², consumes <1 µW, achieves 0.7 °C resolution at 1 Hz, and offers a 73 % area reduction over conventional sensors.

Abstract

This paper presents novel low-cost CMOS temperature sensor for controlling the self-refresh period of a mobile DRAM. In the proposed temperature sensor, the temperature dependency of poly resistance is used to generate a temperature-dependent bias current, and a ring oscillator driven by this bias current is employed to obtain the digital code pertaining to on-chip temperature. This method is highly area-efficient, simple and easy for IC implementation as compared to traditional temperature sensors based on bandgap reference. The proposed CMOS temperature sensor was fabricated with an 80 nm 3-metal DRAM process, which occupies extremely small silicon area of only about 0.016 mm2 with under 1 μW power consumption for providing 0.7 °C effective resolution at 1 sample/s processing rate. This result indicates that as much as 73% area reduction was obtained with improved resolution as compared to the conventional temperature sensor in mobile DRAM.

References

6