Optical Engineering · 2012 · 15 citations · 22 references
Natural SciencesMaterials EngineeringMaterials ScienceHeat TransferOpticsSurface SciencePhysical OpticsReflectance ModelingSurface ModelingSurface PhysicsModel SimulationSpecular ReflectanceSpecular ReflectionSpecular Surface RadiationSurface ReflectanceThermophysical PropertiesThermophysical Property MeasurementVisible Radiation
For the past two decades, the need for three-dimensional (3-D) scanning of industrial objects has increased significantly and many experimental techniques and commercial solutions have been proposed. However, difficulties remain for the acquisition of optically non-cooperative surfaces, such as transparent or specular surfaces. To address highly reflective metallic surfaces, we propose the extension of a technique that was originally dedicated to glass objects. In contrast to conventional active triangulation techniques that measure the reflection of visible radiation, we measure the thermal emission of a surface, which is locally heated by a laser source. Considering the thermophysical properties of metals, we present a simulation model of heat exchanges that are induced by the process, helping to demonstrate its feasibility on specular metallic surfaces and predicting the settings of the system. With our experimental device, we have validated the theoretical modeling and computed some 3-D point clouds from specular surfaces of various geometries. Furthermore, a comparison of our results with those of a conventional system on specular and diffuse parts will highlight that the accuracy of the measurement no longer depends on the roughness of the surface.
22
Review of 20 years of range sensor development
F. Blais · Journal of Electronic Imaging · 2004 · 895 citations
Directional Reflectance and Emissivity of an Opaque Surface
Fred E. Nicodemus · Applied Optics · 1965 · 703 citations