The absorption of axial acoustic waves by a perforated liner with bias flow

Jeff D. Eldredge, Ann P. Dowling

Journal of Fluid Mechanics · 2003 · 244 citations · 30 references

Concepts

TL;DR

The study investigates the effectiveness of a cylindrical perforated liner with mean bias flow for absorbing planar acoustic waves in a duct and develops a one‑dimensional model to capture this mechanism. The absorption mechanism relies on converting acoustic energy into flow energy via vorticity fluctuations at aperture rims, modeled with a homogeneous compliance based on Rayleigh conductivity, and analyzed through acoustic‑energy‑flux calculations that link local stagnation‑enthalpy variations to absorption, enabling optimal design through a key parameter grouping. Experimental validation confirms the model’s accuracy, demonstrating that the liner can absorb a large fraction of incoming energy and eliminate upstream reflections in specific frequency ranges, with bandwidth further enhanced by optimal liner placement.

Abstract

The effectiveness of a cylindrical perforated liner with mean bias flow in its absorption of planar acoustic waves in a duct is investigated. The liner converts acoustic energy into flow energy through the excitation of vorticity fluctuations at the rims of the liner apertures. A one-dimensional model that embodies this absorption mechanism is developed. It utilizes a homogeneous liner compliance adapted from the Rayleigh conductivity of a single aperture with mean flow. The model is evaluated by comparing with experimental results, with excellent agreement. We show that such a system can absorb a large fraction of incoming energy, and can prevent all of the energy produced by an upstream source in certain frequency ranges from reflecting back. Moreover, the bandwidth of this strong absorption can be increased by appropriate placement of the liner system in the duct. An analysis of the acoustic energy flux is performed, revealing that local differences in fluctuating stagnation enthalpy, distributed over a finite length of duct, are responsible for absorption, and that both liners in a double-liner system are absorbant. A reduction of the model equations in the limit of long wavelength compared to liner length reveals an important parameter grouping, enabling the optimal design of liner systems.

References

30