Dental Materials Journal · 2001 · 38 citations · 10 references
Natural SciencesMaterials EngineeringMaterials ScienceCorrosion ScienceElectrochemistrySurface ScienceCorrosion EngineeringCorrosion MechanismsCorrosion ResistanceCorrosion-resistant MaterialsElectrochemical CorrosionOrthodontic MaterialsCorrosion BehaviorCorrosion Of Nickel-based AlloysLocalized Corrosion ResistanceNickel-based AlloysOrthodontic WiresOxide Film StabilityOxide Layer FormationPickling
The corrosion behaviors of a commercial Ni-Ti alloy orthodontic wire and a polished plate with same composition in 0.9% NaCl and 1% lactic acid solutions were examined using an electrochemical technique, an analysis of released ions, and a surface analysis by X-ray photoelectron spectroscopy (XPS). The effect of polishing the wire on the corrosion was also examined. The XPS analysis demonstrated the presence of a thick oxide film mainly composed of TiO2 with trace amounts of Ni hydroxide, which had formed on the wire surface during the heat treatment and subsequent pickling processes. This oxide layer contributed to the higher resistance of the as-received wire to both general and localized corrosion in 0.9% NaCl solution, compared with that of the polished plate and the polished wire. The thick oxide layer, however, was not stable and did not protect the orthodontic wire from corrosion in 0.1% lactic acid solution.
10
Development of shape memory alloys.
Shuichi Miyazaki, Kazuhiro Otsuka · ISIJ International · 1989 · 501 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17