IEEE Transactions on Components and Packaging Technologies · 2005 · 13 citations · 6 references
EngineeringAutomotive EngineeringMaterials ScienceAutomotive MaterialsPolymer EngineeringPolymer MaterialsPolymer DegradationStructural ConnectionsAutomotive Polymer MaterialsAutomotive Safety SystemsConnectorsElectrical Insulation MaterialsExtinctionFuses
Although connectors are generally not designed to disconnect electrical loads under power, in some circumstances they are mated and unmated under load. For instance, during repairs, diagnostic procedures, or when blown fuses are replaced under short circuit conditions. At dc system voltage levels significantly higher than the minimum arc voltage of metals such hot-disconnections may impact the reliability of the connection, the electrical distribution system, and automotive safety. Gassing polymers mounted onto connector terminals may reduce the damage resulting from disconnections under dc loads, and therefore enable connector designs with occasionally (forward running) arcing terminals. The authors discuss the effects of different types of gassing polymers on arc extinction and connector damage of standard automotive connectors.
6
Automotive electronics power up
John G. Kassakian, John M. Miller, Norman L. Traub · IEEE Spectrum · 2000 · 99 citations
Engineering, Automotive Engineering, Electrical Engineering +17
Disengaging connectors under automotive 42 VDC loads
T.J. Schoepf, G.A. Drew · 2003 · 13 citations
Engineering, Automotive Engineering, Electrical Engineering +16