Single‐Step Sulfo‐Selenization Method to Synthesize Cu<sub>2</sub>ZnSn(S<sub><i>y</i></sub>Se<sub>1−<i>y</i></sub>)<sub>4</sub> Absorbers from Metallic Stack Precursors

Andrew Fairbrother, Xavier Fontané, Víctor Izquierdo‐Roca, M. Espíndola-Rodríguez, Simón López‐Mariño, Marcel Placidi, J. López‐García, A. Pérez-Rodrı́guez, Edgardo Saucedo

ChemPhysChem · 2013 · 54 citations · 36 references

Concepts

Abstract

Pentenary Cu2ZnSn(S(y)Se(1-y))4 (kesterite) photovoltaic absorbers are synthesized by a one-step annealing process from copper-poor and zinc-rich precursor metallic stacks prepared by direct-current magnetron sputtering deposition. Depending on the chalcogen source--mixtures of sulfur and selenium powders, or selenium disulfide--as well as the annealing temperature and pressure, this simple methodology permits the tuning of the absorber composition from sulfur-rich to selenium-rich in one single annealing process. The impact of the thermal treatment variables on chalcogenide incorporation is investigated. The effect of the S/(S+Se) compositional ratio on the structural and morphological properties of the as-grown films, and the optoelectronic parameters of solar cells fabricated using these absorber films is studied. Using this single-step sulfo-selenization method, pentenary kesterite-based devices with conversion efficiencies up to 4.4 % are obtained.

References

36