Quantitative Analysis of Crystalline and Amorphous Phases in Glass–Ceramic Composites Like LTCC by the Rietveld Method

Stefan Kemethmüller, Andreas Roosen, F. Goetz‐Neunhoeffer, J. Neubauer

Journal of the American Ceramic Society · 2006 · 74 citations · 14 references

DOIFull text

Open access

Concepts

Abstract

Glass–ceramic composites like low‐temperature cofired ceramics are densified at temperatures below 900°C via liquid‐phase sintering. For high‐frequency applications, materials with low dielectric losses are needed. At these frequencies glass exhibits higher dielectric losses than a crystalline phase; therefore, the glass amount is reduced after densification by crystallization. To perform a quantitative X‐ray analysis of such glass–ceramic composites, a method based on Rietveld refinement was developed. For optimum results, the X‐ray diffraction patterns were fitted using the software TOPAS 2.1 from Bruker AXS. With this method, it is possible to determine quantitatively the amount of crystalline phases and also the amount of the remaining amorphous phase.

References

14