Relative humidity and temperature modify the mechanical properties of isolated tomato fruit cuticles

Abstract

The mechanical properties of enzymatically isolated cuticular membrane (CM) from ripe tomato fruits were investigated at 10 to 45°C and relative humidity (RH) of 40 to wet. CM samples were stressed by uniaxial tension loads to determine their tensile modulus, E, breaking stress (strength), σ(max), and maximum elongation, ε(max). The CM stress-strain curves revealed a biphasic behavior when tested at RH values below wet conditions. In the first phase, CM responded to the loads by instantaneous extension with no further extension recorded until a further load was added: defined as pure elastic strain (E(e)). In the second phase, CM responded by instantaneous extension and by some additional time-dependent extension, defined as viscoelastic strain (E(v)). When CMs were submerged in aqueous solution (wet), the stress-strain curves were monophasic, with both elastic and viscoelastic strain. E(e) depended on RH and was higher than E(v), which was independent of RH. Temperature decreased E(e) and σ(max) of tomato fruit CM. Temperature response was not linear but consisted of two temperature-independent phases separated by a transition temperature. This transition zone has been related previously to the presence of a secondary phase transition in the cutin matrix of the tomato fruit CM.