17th AIAA International Space Planes and Hypersonic Systems and Technologies Conference · 2011 · 16 citations · 13 references
Natural SciencesComputational EngineeringPhysicsComputational Fluid DynamicsFluid DynamicsPlasma PhysicsPlasma SimulationPlasma TransportPlasma-surface InteractionsPlasma-wall InteractionsShock WavesSupersonic AerodynamicsCompression Ramp DesignPlasma DepositionPlasma GenerationShock Wave ControlShock Wave DynamicsSupersonic FlowSupersonic Flow ShocksSupersonic Performance
The paper presents results of experimental and computational study of near-surface electrical discharge effect on shocks configuration in a compression ramp and 2D inlet performance in M=2-2.5 supersonic flow. Two models were designed for experiments in connecting pipe configuration and in free-stream correspondingly. The models contain a special insertion with flush mounted plasma generator arranged ahead of the first rupture of twocorner ramp. It is shown that the plasma deposition allows an accurate regulation of shock angle and reflection line position on opposite wall of the first model and in vicinity of cowl lip of the second model. The magnitude of regulation effect depends on the power release. The CFD efforts in 3D NS approach clarify some extra features of plasma-flow-surface interaction. I. Introduction he paper reports results of the experimental and computational efforts devoted to plasma effect on supersonic compression ramp performance. Comparing with mechanical one the method of high-speed flow control based on plasma deposition possesses, at least, two advantages, namely: inertialess and flexibility (electronic control of impact magnitude and shocks’ location). Numerous potential applications may be forecasted for plasma-based flow control technique. However it should be considered that in spite of large interest to this scientific field [1-14], a prospective of practical implementation is still ambiguous. One of important purposes of this work is to highlight the benefits and penalties of plasma approach for highspeed flow steering in inlet-like geometrical configuration. Previous study has clearly shown that near surface plasma is enable to modify a high-speed flowfield on controllable manner, including oblique shocks generation, artificial obstacles screening, control of flow instabilities and separation [13-15]. Recent works [16-17] demonstrate a typical pattern of plasma-flowsurface interaction in case of plane and inclined walls. There were also indicated a sophisticated behavior of non-equilibrium plasma in flow. The important feature of electrical discharge is that the gas heating occurs not only at the place of electric current location but also downstream of this region due to both recombination and vibrational-translational (V-T) relaxation. Under typical conditions up to 90% of power deposition can be conserved in vibrational reservoir and dissociation of molecular gas. It appears in generation of complicated profile of extrusive layer because some part of energy can be deposited downstream of the discharge zone. The realization of high enough controllable level of gas excitation in predefined region is non-trivial technical problem for a high-speed flow. Usually plasma of electrical discharge appears in more-less inhomogeneous form at typical level of gas pressure, delivering a big variation of gas parameters in interaction zone. At the same time the effectiveness (effect per power unit) of non-uniform plasma has been demonstrated to be higher than at processing of entire gas volume. Such a mode is realized at relatively high gas density, which is typical for practical aerodynamics. Based on both theoretical and experimental studies,
13
Airflow control by non-thermal plasma actuators
Éric Moreau · Journal of Physics D Applied Physics · 2007 · 1.6K citations
Plasmas in high speed aerodynamics
P. Bletzinger, B. N. Ganguly, David Van Wie et al. · Journal of Physics D Applied Physics · 2005 · 321 citations