AIChE Journal · 2005 · 49 citations · 32 references
EngineeringChemical EngineeringFluid DynamicsUltrasonographyUltrasoundFlow MeasurementPipe FlowExperimental Pipe FlowPenetration DepthPlug FlowPressure DropSuspensionsVelocity ProfilesYield StressYield Stress Measurement
Abstract For the first time, noninvasive measurements in pulp suspensions at consistencies ranging from 0.74%(w/w) up to 7.8%(w/w) have been performed simultaneously using ultrasound velocity profiling (UVP) and laser doppler anemometry (LDA) in an experimental pipe flow loop. Results show that both techniques can be used to determine the plug flow velocity with good agreement in much more concentrated pulp suspensions than what has been reported so far in the literature. Instantaneous velocity profiles have been obtained noninvasively in pipe flow using the UVP technique, and it is shown that combined with simultaneous pressure drop measurements, the UVP technique can be used to determine the yield stress in‐line. Results further show that LDA works, with limited penetration depth of up to several millimeters, even in strongly opaque systems, such as in 7.8%(w/w) pulp. Deviating results were however obtained in the near wall region and more work is needed. © 2005 American Institute of Chemical Engineers AIChE J, 2006
32
Principles and Practice of Laser-Doppler Anemometry
F. Durst, A. Melling, J. H. Whitelaw et al. · Journal of Applied Mechanics · 1977 · 1K citations · Full text
Principles and practice of laser-Doppler anemometry
J. B. Abbiss · Optics & Laser Technology · 1976 · 317 citations
Development of an ultrasound velocity profile monitor
Y. Takeda · Nuclear Engineering and Design · 1991 · 293 citations
Medicine, Radiology, Instrumentation +11