Journal of Applied Polymer Science · 2006 · 25 citations · 19 references
EngineeringMaterials EngineeringMaterials ScienceNanomaterialsPolymer ChemistryRheologyNanomechanicsPolymer RheologyRheological Characterization Of SuspensionsShear ThinningSuspension RheologyViscoelastic BehaviorConcentration EffectsFiller MaterialsFiller Particle Size EffectsRheological PropertiesShear RateShear StressSuspension Yield StressYield Stress
Abstract The effects of filler particle size and concentration on the rheological properties of hydroxyl terminated polydimethylsiloxane (HO‐PDMS) filled with calcium carbonate (CaCO 3 ) were investigated by an advanced rheometric expansion system (ARES). The Casson model was used to describe the relationship between shear stress and shear rate for steady‐state measurement. Micron‐CaCO 3 could not afford the CaCO 3 /HO‐PDMS suspensions obvious shear thinning behavior and a yield stress high enough, whereas nano‐CaCO 3 could provide the suspensions with remarkable shear thinning behavior and high yield stress. Incorporation of nano‐CaCO 3 into HO‐PDMS resulted in the transformation of HO‐PDMS from a mainly viscous material to a mainly elastic material. With increasing nano‐CaCO 3 content, shear thinning behavior of nano‐CaCO 3 /HO‐PDMS suspensions became more obvious. Remarkable yield stress was observed in nano‐CaCO 3 /HO‐PDMS suspensions with high filler content, and increased with increasing nano‐CaCO 3 content. The degree of thixotropy was quantitatively determined using a thixotropic loop method. It was found that nano‐CaCO 3 favored more the buildup of filler network structure in the suspensions than micron‐CaCO 3 at the same weight fraction. Furthermore, increasing nano‐CaCO 3 content accelerated the establishment of filler network structure in the nano‐CaCO 3 /HO‐PDMS suspensions. An overshoot phenomenon was observed in the nano‐CaCO 3 /HO‐PDMS suspensions at high shear rates. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3395–3401, 2006
19