Large Hydrocarbon Compositional Gradient Revealed by In-Situ Optical Spectroscopy

Go Fujisawa, Soraya S. Betancourt, Oliver C. Mullins, Torleif Torgersen, Michael O’Keefe, Toru Terabayashi, Chengli Dong, Kåre Otto Eriksen

SPE Annual Technical Conference and Exhibition · 2004 · 49 citations · 10 references

Concepts

Abstract

Abstract This paper presents a case study of a North Sea appraisal well where a large vertical fluid composition variation, missed by a conventional pressure gradient analysis method, was observed in situ in real time by a new fluid composition analyzer utilizing visible near-infrared (NIR) spectroscopy. For optimal oil production, it is as vital to assess the spatial variation of fluid properties as it is to assess the spatial variation of formation properties. Conventional wireline triple combo measurements showed the interval of interest was uniform and free from noticeable impermeable layers. A resistivity log showed an approximate oil/water contact. Wireline pressure testing identified three different pressure gradients corresponding to gas, oil, and water, all in hydraulic communication. However, the pressure testing did not indicate a gradient in hydrocarbon composition. Fluid was sampled and analyzed in real time by a wireline fluid sampling-analyzing toolstring that included the fluid composition analyzer. This tool analyzes petroleum fluid and gives concentrations for four group compositions (C1, C2−C5, C6+, and CO2), gas/oil ratio (GOR), and qualitative information regarding heavy-end content and stock-tank crude density. The analyzer showed the hydrocarbon fluid in an oilbearing zone was not vertically homogeneous but instead had a large vertical variation. The samples captured by the wireline sampling tool were sent for a laboratory compositional analysis that confirmed the variation determined by the downhole analysis. Both results identified the heterogeneity of hydrocarbon fluid in the interval. This paper also covers briefly the measurement principle of the analyzer and discusses the impact and benefit the new technology brings. The concept of flexible fluid sampling is particularly important because it enables operators to make sampling decisions based on real-time fluid analysis results rather than a predetermined job plan.

References

10