Powder Diffraction · 2000 · 53 citations · 15 references
Natural SciencesMaterials EngineeringMaterials ScienceBuilding MaterialsCeramicsCrystal StructureCementitious MaterialsCrystallization ProcessesCrystallographyPolymorphism AnalysisX-ray CrystallographyX-ray DiffractionPhase QuantificationPolymorphic TypesPortland CementPowder Diffraction AnalysisPowder X-ray DiffractionRefinementRietveld AnalysisRietveld Refinement
Crystalline phases present in the three NIST SRM Standard Portland cement clinkers 8486, 8487, and 8488 have been quantified from XRD powder patterns, ( CoK α radiation), using the full-profile Rietveld method. Included in the Rietveld refinement are rhombohedral (R), monoclinic (M), and triclinic (T) crystal polymorphic forms of C 3 S , as well as crystal polymorphs of C 2 S and C 3 A . It is necessary to specify the phase crystallography including polymorphs, because of the extreme superposition of alite and belite XRD lines in the clinker patterns. Unsatisfactory results occur when only one or two of the C 3 S polymorphs are used in the Rietveld quantification; best results occur when all three polymorphs for C 3 S are included. The latter are called RMT-type refinements. The Rietveld full-profile XRD method is as precise as the microscope point-counting (MPC) method, but much less labor-intensive. The Rietveld method can quantify the C 3 S phase polymorphs, as well as total C 3 S . Rietveld and MPC methods give the same phase weight percentages for the three NIST standard clinkers. Calculated oxide weight percentages obtained from Rietveld phase weight percentages agree well with oxide percentages determined by XRF analysis. Bogue mineral weight percentages do not agree with Rietveld or MPC data, while transformation of the Bogue mineral percentages to oxides does not compare well with XRF analysis.
15