Environmental Technology · 1998 · 25 citations · 0 references
AgricultureEnvironmental SciencesSoil SciencesSoil ChemistrySoil RemediationSoil SciencePetroleum Hydrocarbon RemediationSoil Contaminant ChemistrySoil EvaporationSoil PollutionSoil Vapor ExtractionAliphatic HydrocarbonsEvaporation RatesPetroleum HydrocarbonsResidual HydrocarbonsSandy Soil RemediationSoil Remediation ChemistrySoil Vapor MonitoringVapor Extraction
Abstract An experimental set-up with bench-scale soil columns was developed to simulate soil vapour extraction (SVE) and soil bioventing (SBV) under laboratory conditions. The distinction between SVE and SBV was made by using N2 and CO2 free air as flushing gases, respectively. Semi-continuous monitoring of model oil hydrocarbons, CO2 and O2 evolution in the soil gas using the gas chromatography, allowed the remediation results to be compared. Separation of SBV into evaporation and biodegradation processes, distinction of three independent phases for each process, helped to get better insight in the basic aspects of both processes and direct comparison with SVE. Soil-gas partitioning for toluene and decane, together with monitored concentrations in soil vapours, were used to evaluate the kinetics of hydrocarbons removal from soil. Biodegradation and evaporation rates were determined for each phase to compare SVE and SBV. In columns, each with ca. 4 kg of sandy soil, moisture of 15% (w/w), and temperature 20 °C, about 4000 mg kg−1 of toluene initially present in soil was reduced by 99 % within 11 and 24 days of SBV and SVE, respectively, at the applied constant gas flow of 40 cm3 cm−2 h−1. The initial decane concentration of 400 mg kg−1 decreased below 1 mg kg−1 during SBV after 33 days, compared to 60 mg kg−1 during SVE, within 36 days. SBV was shown as an appropriate technology to treat VOCs (e.g. toluene) and SVOCs (e.g. decane), in contrast to SVE, with respect to remediation times and residual concentrations. Keywords: SBVSVEevaporationbiodegradationrateefficiency