IEEE Transactions on Industrial Electronics · 2011 · 152 citations · 37 references
EngineeringElectrical EngineeringCircuit TheoryLow-power DesignPower ElectronicsConverter TopologiesDc-ac InvertersDc-dc ConvertersModulationPulse-width ModulationFundamental LineHarmonic DistortionSpace Vector ModulationSpace Vector Pulse-width ModulationSwitching StrategiesTotal Harmonic DistortionTotal Harmonic Distortion ReductionVoltage Harmonic Distortion
A three-level inverter produces six active vectors, each of normalized magnitudes 1, 0.866, and 0.5, besides a zero vector. The vectors of relative length 0.5 are termed pivot vectors. The three nearest voltage vectors are usually used to synthesize the reference vector. In most continuous pulsewidth-modulation (PWM) schemes, the switching sequence begins from a pivot vector and ends with the same pivot vector. Thus, the pivot vector is applied twice in a subcycle or half-carrier cycle. This paper proposes and investigates alternative switching sequences, which use the pivot vector only once but employ one of the other two vectors twice within the subcycle. The total harmonic distortion (THD) in the fundamental line current pertaining to these novel sequences is studied theoretically as well as experimentally over the whole range of modulation. Compared with centered space vector PWM, two of the proposed sequences lead to reduced THD at high modulation indices at a given average switching frequency.
37
The age of multilevel converters arrives
Leopoldo G. Franquelo, José Rodríguez, José I. Leon et al. · IEEE Industrial Electronics Magazine · 2008 · 2K citations · Full text
A Survey on Neutral-Point-Clamped Inverters
José Rodríguez, Steffen Bernet, P. Steimer et al. · IEEE Transactions on Industrial Electronics · 2009 · 1.8K citations