IEEE Transactions on Instrumentation and Measurement · 2009 · 60 citations · 7 references
EngineeringComputer ScienceComputer VisionDigital ImagingMachine VisionCalibrationCamera GeometryCamera ModelsCamera ProjectionScene ReconstructionSpatial CalibrationCamera CalibrationExtrinsic Camera ParametersIntrinsic Camera Calibration
This paper presents a novel method for calibrating line-scan cameras using a calibration pattern comprising two parallel planes with lines that can be described using known equations. Using pattern geometry and a line that is captured by a line-scan camera, we calculate the 3-D coordinates of the points corresponding to the straight lines of a pattern that is captured by the line-scan camera. These coordinates are used to obtain the intrinsic and extrinsic parameters of the line scan using a standard calibration procedure that is based on a recursive least squares method. In this paper, the procedure of calibration and the results obtained for a specific line scan will be shown; specifically, the obtained median residual error is 0.28 pixel. Also, the repetitiveness of the calibration process was verified for a sequence of 500 times.
7