Journal of Biological Engineering · 2013 · 95 citations · 17 references
EngineeringMicrobiologyFood MicrobiologySurface EngineeringSurface ScienceAntimicrobial BiomaterialsCoatingsSurface CoatingsSurface ModificationThermal Spray CoatingsAntibacterial Surface ModificationAntimicrobial PropertiesAntimicrobial TreatmentsDisinfectionPlasma Sprayed CoatingsSpray Deposition EfficiencySurface DepositionThermal Disinfection
BACKGROUND: Bacterial contamination on touch surfaces results in increased risk of infection. In the last few decades, work has been done on the antimicrobial properties of copper and its alloys against a range of micro-organisms threatening public health in food processing, healthcare and air conditioning applications; however, an optimum copper method of surface deposition and mass structure has not been identified. RESULTS: A proof-of-concept study of the disinfection effectiveness of three copper surfaces was performed. The surfaces were produced by the deposition of copper using three methods of thermal spray, namely, plasma spray, wire arc spray and cold spray The surfaces were then inoculated with meticillin-resistant Staphylococcus aureus (MRSA). After a two hour exposure to the surfaces, the surviving MRSA were assayed and the results compared.The differences in the copper depositions produced by the three thermal spray methods were examined in order to explain the mechanism that causes the observed differences in MRSA killing efficiencies. The cold spray deposition method was significantly more effective than the other methods. It was determined that work hardening caused by the high velocity particle impacts created by the cold spray technique results in a copper microstructure that enhances ionic diffusion, and copper ions are principally responsible for antimicrobial activity. CONCLUSIONS: This test showed significant microbiologic differences between coatings produced by different spray techniques and demonstrates the importance of the copper application technique. The cold spray technique shows superior anti-microbial effectiveness caused by the high impact velocity imparted to the sprayed particles which results in high dislocation density and high ionic diffusivity.
17
On the role of dislocations in bulk diffusion
E. W. Hart · Acta Metallurgica · 1957 · 655 citations
Natural Sciences, Materials Engineering, Materials Science +11
Bacterial Killing by Dry Metallic Copper Surfaces
Christophe Espírito Santo, Ee Wen Lam, Christian Elowsky et al. · Applied and Environmental Microbiology · 2010 · 536 citations · Full text
Kristopher Page, Michael A. Wilson, Ivan P. Parkin · Journal of Materials Chemistry · 2009 · 534 citations