Recent developments of high power converters for industry and traction applications

Steffen Bernet

IEEE Transactions on Power Electronics · 2000 · 452 citations · 6 references

Concepts

TL;DR

New high‑power devices such as IGCTs and high‑voltage IGBTs are accelerating the widespread use of PWM voltage‑source converters in industry and traction. The paper reviews the state‑of‑the‑art of power semiconductors and recent traction converter developments for DC and AC mains. The authors describe IGCT and high‑voltage IGBT characteristics, present design and loss simulations of a 1.14 MVA two‑level voltage‑source inverter and a 6 MVA three‑level neutral‑point‑clamped converter, and discuss a commercial IGCT‑based neutral‑point‑clamped PWM voltage‑source converter for medium‑voltage drives.

Abstract

The introduction of new high power devices like integrated gate commutated thyristors (IGCTs) and high voltage insulated gate bipolar transistors (IGBTs) accelerates the broad use of pulse width modulation (PWM) voltage source converters in industrial and traction applications. This paper summarizes the state-of-the-art of power semiconductors. The characteristics of IGCTs and high voltage IGBTs are described in detail. Both the design and loss simulations of a two level 1.14 MVA voltage source inverter and a 6 MVA three-level neutral point clamped voltage source converter with active front end enable a detailed comparison of both power semiconductors for high power PWM converters. The design and the characteristics of a commercially available IGCT neutral point clamped PWM voltage source converter for medium voltage drives are discussed. Recent developments and trends of traction converters at DC mains and AC mains are summarized.

References

6