A telemetering ocean-bottom seismograph

John Ewing, Maurice Ewing

Journal of Geophysical Research Atmospheres · 1961 · 78 citations · 9 references

Concepts

Abstract

Successful tests of a telemetering ocean-bottom seismograph have been made on three occasions. In all cases, the seismograph was resting on the ocean bottom or planted in the sediments, sending its information to the surface by frequency modulation of a supersonic beam. The use of cables connecting the instrument on the bottom to the recording ship was avoided so that the level of background noise would not be influenced by shaking the instrument by a long cable. These first tests were designed to help determine what frequencies should be recorded, at what levels, and what method is best for transmitting to the recording instrument at the surface the earth's vibration in these frequencies. Neither the instrument used nor the method was the optimum for obtaining all of the seismological data from the ocean bottom, but they have demonstrated the feasibility of ocean-bottom seismographs and have helped to determine the criteria for the more complicated instruments and methods of transmittal which will ultimately make up a world-wide system. Data from such a system are expected to settle the question of the origin and propagation of microseisms, provide detailed information about the sedimentary layer and about the earth's crust and upper mantle, and, most important of all, may greatly increase the radius over which a single station can monitor small earthquakes or explosions. This will materially increase our ability to investigate the seismicity of the entire earth and also to monitor nuclear explosions. In the preliminary tests body waves from one earthquake and several seismic refraction profiles were recorded. The earthquake record indicates reasonably good signal-to-noise ratio in the short-period range. The refraction profiles give indications from P and S waves of important regional and local variations in the character of the crust-mantle interface.

References

9