Feedforward amplifier for WCDMA base stations with a new adaptive control method

Abstract

This paper describes a feedforward amplifier with a new adaptive control method. For the modulated signal with a high peak-to-average ratio, the residual output error level of the feedforward amplifier can be further reduced by adjusting the 1st loop control parameters to have an imperfect signal cancellation since an error amplifier generates less distortion in the case. For verification, a baseband signal simulation and experiments have been performed. A 30 W feedforward amplifier for WCDMA base stations at 2.14 GHz shows a 4 dB improvement of linearization when it is controlled by the proposed method.