Properties of Synthetic Lightweight Aggregates for use in Pavement Systems

Christopher W. Swan, Aaron Sacks

2005 · 15 citations · 3 references

Concepts

Abstract

This paper presents properties of new synthetic lightweight aggregates (SLAs), made of plastic and fly ash, and their implications for use as aggregate in pavements systems. These aggregates are manufactured through a thermal process that combines and co-extrudes plastic and coal fly ash. The plastic acts as a matrix material that binds and encapsulates the fly ash particulates. In this study, index and compression properties are presented for SLAs made with different plastic types. All aggregates have an approximate fly ash to plastic ratio, by weight, of 80:20 and use fly ash with carbon contents of 15% to 30%. Index properties presented for the various SLAs include gradation, specific gravity, and water absorption capacity. A series of one-dimensional compression tests, at moderate and elevated stresses, were performed to compare the compression behavior of SLAs with that of traditional aggregate (sand). The results shows that SLAs have relatively substantial elastic deformation and rates of secondary compression but also exhibit substantial rebound upon unloading when compared to sand. However, at elevated stresses, the rate of secondary compression for both the SLAs and sand approach similar values, with some SLAs actually exhibiting a slower rate of secondary compression. Overall, the compression results show that SLAs will have advantages (e.g., lightweight, stress absorption) and disadvantages (e.g., excessive deformation) over the use of traditional granular materials in pavement systems.

References

3