2011 · 14 citations · 6 references
EngineeringElectrical EngineeringLow-power DesignPower ElectronicsRenewable Energy SystemsPhotovoltaic DevicesPower Electronics For Renewable EnergyRenewable Energy Power ConversionSolar CellsSolar Energy SystemsSolar Photovoltaic SystemsCmos ScalingEnergy HarvestingHill ClimbingIllumination LevelsMaximum Power Point Tracking ConvertersPhotovoltaic SystemsPower Conversion EfficiencyPower Converter Design
This paper presents a step-up micro-power converter for solar energy harvesting applications. The circuit uses a SC voltage tripler architecture, controlled by an MPPT circuit based on the Hill Climbing algorithm. This circuit was designed in a 0.13 µm CMOS technology in order to work with an a-Si PV cell. The circuit has a local power supply voltage, created using a scaled down SC voltage tripler, controlled by the same MPPT circuit, to make the circuit robust to load and illumination variations. The SC circuits use a combination of PMOS and NMOS transistors to reduce the occupied area. A charge re-use scheme is used to compensate the large parasitic capacitors associated to the MOS transistors. The simulation results show that the circuit can deliver a power of 1266 µW to the load using 1712 µW of power from the PV cell, corresponding to an efficiency as high as 73.91%. The simulations also show that the circuit is capable of starting up with only 19% of the maximum illumination level.
6
Hui Shao, Chi-Ying Tsui, Wing‐Hung Ki · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · 2009 · 135 citations