IEEE Transactions on Industrial Electronics · 2006 · 69 citations · 12 references
EngineeringElectrical EngineeringCircuit TheoryMicroelectronicsPower ElectronicsElectric CircuitsElectrical System DiagnosticsElectromagnetic CompatibilityNoise In Electronic DevicesNoise In Semiconductor DevicesPower QualityElectromagnetic InterferenceElectromagnetic Interference MitigationNoise AnalysisNoise In Power Semiconductor DevicesNoise Parameter ExtractionNoise Prediction ModelsPower ConvertersPower Electronic Converters
In this paper, a general lumped circuit modeling method is proposed to describe the conducted electromagnetic interference (EMI) coupling mechanism for the switching power converters. The EMI characteristics of the converters can be analytically deduced from a circuit theoretical viewpoint. The shunt and series impedance insertion method is introduced to identify the differential-mode (DM) and common-mode (CM) noise impedances and voltage sources. The procedure of parameters estimation for the noise models comprises several simple measurements and is convenient to be implemented. Experimental illustrations are also included to verify the validity of the proposed method. Comparison between the measured and predicted results shows that the EMI modeling method can provide adequate prediction of the EMI feature for power-switching converters
12
Measurement of noise source impedance of off-line converters
Dongbing Zhang, D.Y. Chen, M.J. Nave et al. · IEEE Transactions on Power Electronics · 2000 · 120 citations
Conducted EMI analysis of a boost PFC circuit
Wei Zhang, Mingze Zhang, F.C. Lee et al. · 2002 · 94 citations