IEEE Journal of Solid-State Circuits · 1992 · 100 citations · 14 references
EngineeringComputer EngineeringComputer ScienceComputer ArchitectureField-programmable Gate ArraysLow-power DesignField-programmable Gate Array ArchitectureI/o ArchitectureInterconnect ArchitectureMulticore Processor DesignRouting ArchitectureCrossbar SwitchesCrossbar SwitchingData RoutingFast Arithmetic CircuitsHigh-speed I/o Circuit DesignProcessor ArchitectureReal-time ProcessingReal-time Signal Processing
A field-programmable multiprocessor integrated circuit, PADDI (programmable arithmetic devices for high-speed digital signal processing), has been designed for the rapid prototyping of high-speed data paths typical to real-time digital signal processing applications. The processor architecture addresses the key requirements of these data paths: (a) fast, concurrently operating, multiple arithmetic units, (b) conflict-free data routing, (c) moderate hardware multiplexing (of the arithmetic units), (d) minimal branch penalty between loop iterations, (e) wide instruction bandwidth, and (f) wide I/O bandwidth. The initial version contains eight processors connected via a dynamically controlled crossbar switch, and has a die size of 8.9*9.5 mm in a 1.2- mu m CMOS technology. With a maximum clock rate of 25 MHz, it can support a computation rate of 200 MIPS and can sustain a data I/O bandwidth of 400 Mbytes/s with a typical power consumption of 0.45 W. An assembler and simulator have been developed to facilitate programming and testing of the chip.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
14
Keshab K. Parhi, David G. Messerschmitt · IEEE Transactions on Acoustics Speech and Signal Processing · 1989 · 362 citations
A 300-MOPS Video Signal Processor With A Parallel Architecture
Taichi Minami, H. Yamauchi, Y. Tashiro et al. · 1991 · 40 citations