2005 · 20 citations · 19 references
EngineeringElectrical EngineeringMotor ControlPower ElectronicsPowertrain EngineeringElectric DrivesElectric Motor Drive SystemsElectric Motor DrivesInduction MachinesPulse-width ModulationThree-phase MachinesDirect Torque ControlInduction Motor DrivesSimulation StudiesSpace Vector ModulationSpace Vector Pulse-width ModulationThree-phase Induction MachinesThree-phase Induction MotorsThree-phase Motors
This paper presents a new space vector pulse width modulation based direct torque control technique for three-phase induction motor drive using concept of imaginary switching times. The effective time is determined using imaginary time vector there by the lengthy procedure of using reference voltage vector is eliminated. Also the sector identification and angle determination are not used. Simulation studies have been carried out for the proposed method and results are compared with basic DTC. Results show that the torque, current and flux waveforms are superior to that of conventional direct torque control technique. Though the results of the proposed method are at par to those of DTC with conventional space vector pulse width modulation, there is a significant reduction in execution time due to elimination of lookup table and simplicity in algorithm.
19
FOC and DTC: two viable schemes for induction motors torque control
D. Casadei, F. Profumo, G. Serra et al. · IEEE Transactions on Power Electronics · 2002 · 1.1K citations
Direct torque control of induction machines using space vector modulation
T.G. Habetler, F. Profumo, M. Pastorelli et al. · 2002 · 701 citations