IEEE Microwave and Wireless Components Letters · 2009 · 76 citations · 12 references
EngineeringElectrical EngineeringAnalog ElectronicsMicroelectronicsSemiconductor DevicesCmos Circuit DesignComplementary Metal-oxide-semiconductor TechnologyHigh-frequency Semiconductor DevicesIntegrated Circuit DesignLow-noise Circuit DesignRadio-frequency Integrated CircuitsBandwidthCmos Analog Integrated CircuitsLow-noise AmplifiersLow-noise DesignNoise FigurePower ConsumptionPower GainRf Cmos Design
In this letter, a 0.1-20 GHz low-power low noise amplifier (LNA) is presented. A novel self-biased resistive- feedback topology is proposed. Two inductors inside the feedback loop and a shunt-peaking inductor are exploited to extend the bandwidth. A PMOSFET with inductive degeneration is chosen as the load to boost the gain while maintaining low noise figure (NF) at high frequencies. A source-degeneration inductor is also introduced at the input transistor to ensure good input matching and stability over the entire bandwidth. All inductors are small due to the presence of feedback. The LNA was fabricated using a digital 90 nm CMOS process with 12.7 dB peak power gain, 3.3 dB minimum NF, and - 1 dBm peak input-referred third-order intercept point (IIP3). With 12.6 mW power consumption and 0.12 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> active area, this wideband LNA may replace distributed amplifiers (DAs) in many applications.
12
Design of Full Band UWB Common-Gate LNA
Yuna Shim, Chang-Wan Kim, Jeongseon Lee et al. · IEEE Microwave and Wireless Components Letters · 2007 · 91 citations