Josephson effect gain and noise in SIS mixers

Abstract

The authors report measurements of gain and noise in SIS mixers at 230 and 492 GHz. Measurements were made of relatively high gain and noise associated with Josephson currents that have not been previously reported. These measurements show that Josephson currents are increasingly important as operating frequencies are raised. The techniques used to make these measurements are discussed. Measurements made with hot and cold black-bodies are shown to be inaccurate at high frequencies. The problem is that SIS mixers do not always respond linearly to the signal power incident on them. This is particularly important when (1) very broad band mixers are used and (2) Josephson effect currents are important. Both of these circumstances are present in the quasioptical SIS mixers favored for 500 GHz and higher. Monochromatic signals were used to measure gain and noise to get around these problems.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>