Signal-to-noise ratio studies on γ-Fe<inf>2</inf>O<inf>3</inf>thin film recording disks

A. Terada, Osamu Ishii, Satoshi Ohta, T. Nakagawa

IEEE Transactions on Magnetics · 1983 · 21 citations · 6 references

Concepts

Abstract

The signal-to-noise ratio SNR <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">w</inf> of γ-Fe <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</inf> O <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</inf> thin film disks has been investigated in a linear bit density range of 77-1500 flux reversals per millimeter (FRPM), for several media whose average crystallite sizes were changed by Ti doping. The noise voltage was found to increase as the bit-cell length became shorter, and as the average crystallite size became larger. A SNR <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">w</inf> relationship to the average crystallite size, the resolution, and the bit-cell length was empirically determined as a simple formula. For a 10-μm core width and for a 1.0-μm bit-cell length, an SNR <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">w</inf> of more than 35 dB was estimated to be attainable from the medium which had a 0.90 resolution and had crystallites averaging less than 0.06 μm in size.

References

6