A SiGe BiCMOS burst-mode 155-Mb/s receiver for PON

S. Brigati, P. Colombara, L. D'Ascoli, U. Gatti, T. Kerekes, P. Malcovati

IEEE Journal of Solid-State Circuits · 2002 · 19 citations · 3 references

Concepts

Abstract

In this paper, we present an integrated 155-Mb/s burst-mode receiver (BMR) for passive optical network (PON) applications. The chip has been designed to receive optical signals over a wide dynamic range (-30 to -8 dBm) and temperature range (-40/spl deg/C to +85/spl deg/C). The chip was implemented using a 0.8-/spl mu/m 35-GHz SiGe BiCMOS technology and occupies an area of 4.3/spl times/4.9 mm/sup 2/ with a power consumption of 500 mW from a supply voltage of 5 V (3.3 V for the digital PECL output). In the receiver analog front end, we used a low-noise wide-band transimpedance amplifier followed by a nonlinear gain stage to cover a wide signal range without changing the transimpedance gain. The circuit dynamically adjusts the receiver threshold voltage through a feedback loop, thus optimizing the pulsewidth distortion and canceling the optical as well as the electrical offset voltages.

References

3