THE EFFECT OF NON-NEWTONIAN FLOW BEHAVIOUR ON BINARY DROPLET COLLISIONS: VOF-SIMULATION AND EXPERIMENTAL ANALYSIS

M. Motzigemba, Nils Roth, Dieter Bothe, H.-J Warnecke, Jan Prüß, K. Wielage, Bernhard Weigand

TUbilio (Technical University of Darmstadt) · 2002 · 10 citations · 3 references

Concepts

Abstract

Experimental investigations and numerical simulations of binary droplet collisions using Newtonian and nonNewtonian fluids have been performed. This provides a validation of the employed numerical methods and simulation software as well as a first insight into the basic phenomenon of binary droplet collision with nonNewtonian fluids. The Newtonian, respectively non-Newtonian fluids used were glycerol/water and shear-thinning water/carboxymethylcellulose (CMC). The non-Newtonian behaviour was modelled by means of a generalized Newtonian constitutive equation using a modified power law viscosity function. A shear-thinning liquid shows its lowered viscosity during the droplets collision by a larger maximum diameter of the generated collision complex, compared to a Newtonian collision with similar values of the characteristic dimensionless groups. This behaviour can be simulated and quantitatively reproduced by the three-dimensional CFD code FS3D (University of Stuttgart, ITLR), which has been extended in the present investigation towards non-Newtonian fluids. The code uses the Volume-of-Fluid (VOF) method for the description of the free fluid surface. The obtained results increase confidence in the selected generalized Newtonian modelling for the experimental fluid. The dimensionless time until the collision complex attains its maximum expansion is found to be independent of the viscosity characteristics; it is only a function of the Weber number. Therefore, the absolute time for reaching the maximum complex diameter for a given Weber number is merely proportional to the ratio of droplet diameter to droplet velocity. The simulated velocity fields show that at all stages of the collision process there are areas in which the velocity gradients for shear are larger than the elongational ones, and vice versa. Overall, elongational flow dominates.

References

3