A 1.0-ns/1.0-V Delay-Locked Loop With Racing Mode and Countered CAS Latency Controller for DRAM Interfaces

Abstract

The digital delay-locked loop (DLL) with racing mode and the countered column address strobe (CAS) latency controller are proposed in this paper. The dual-DLL architecture with racing operation is adopted to achieve low power consumption, low jitter, fast locking, wide range of locking, and stuck-free control. The merged dual coarse delay line (MDCDL) reduces the dynamic power consumption of a variable delay line by 30% by sharing a part of the delay line path in DLL. In addition, jitter is reduced by 45 ps in the 1066-DDR3 operating mode by MDCDL. The proposed DLL utilizes an or-and functioned duty cycle corrector (or-and DCC), which consumes 15% of DLL's power, 0.915 pJ/Hz at <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex Notation="TeX">${\rm tCK}=\ {\hbox {1.5 ns}}$</tex></formula> and <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex Notation="TeX">${\rm VDD}=\hbox{1.575\ V}$</tex></formula> . The countered CAS latency controller (CCLC) saves IDD3N current because it does not need a DLL clock and does not need to be activated for IDD3N (active non-power down) state. The DLL clock is enabled and CCLC is activated only when the read command is issued. This operation condition saves the IDD3N current by 60% with the proposed DLL. The proposed DLL is employed in 128 <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex Notation="TeX">$~$</tex></formula> M <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex Notation="TeX">$\times$</tex></formula> 8 <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex Notation="TeX">$~$</tex></formula> DDR3 SDRAM and 64 M <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex Notation="TeX">$\times$</tex></formula> 16 DDR3 SDRAM. The former and the latter are fabricated by 5 <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex Notation="TeX">$\times$</tex> </formula> nm and by 4 <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex Notation="TeX">$\times$</tex> </formula> nm DRAM process technology, respectively. Experimental results show that <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex Notation="TeX">$\pm$</tex></formula> 10% duty error of the external clock can be corrected to within <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex Notation="TeX">$\pm$</tex></formula> 2% duty error in less than 512 cycles of locking time under 1.5 ns of tCK. The proposed DLL and CCLC can operate above 1.0-GHz operating frequency at 1.2 V in 5 <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex Notation="TeX">$\times$</tex></formula> nm DDR3 SDRAM and at 1.0 V in 4 <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex Notation="TeX">$\times$</tex></formula> nm DDR3 SDRAM, respectively. The proposed DLL fabricated with 4 <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex Notation="TeX">$\times$</tex></formula> nm technology consumes 6.1 pJ/Hz at 1.575 V.