IEEE Transactions on Microwave Theory and Techniques · 2012 · 68 citations · 20 references
EngineeringElectrical EngineeringMicroelectronicsMicrowave EngineeringWireless CommunicationsCmos Circuit DesignHigh-frequency Semiconductor DevicesMicrowave Integrated CircuitsMillimeter-wave CommunicationsMixed-signal Integrated Circuit DesignRadio-frequency Integrated CircuitsBroadband Mixer DesignConversion GainLow-power Cmos DesignMillimeter-wave Integrated CircuitsMixersRf Cmos DesignTransimpedance AmplifiersWireless Transmission
The authors present a pair of broadband, low‑LO‑power, low‑DC‑power, high‑speed up/down‑conversion ring mixers for multistandard millimeter‑wave radio applications. Using a 90‑nm CMOS process, the mixers employ weak‑inversion biasing, an IF transimpedance amplifier buffer, and wideband RF design to achieve low LO drive, low DC power, and reasonable conversion gain. The mixers deliver flat conversion gain of –1 ± 2 dB (down‑conversion) and 0 ± 2 dB (up‑conversion) from 40–110 GHz, operate with LO drive powers of –2 and 0 dBm up to 100 GHz, and successfully support gigabit BPSK transmission for 60 GHz PAN, E‑band fiber, and 77 GHz radar.
In this paper, a pair of broadband, low-LO-power, low-dc-power, and high-speed up/down-conversion ring mixers are presented for multistandard millimeter-wave (MMW) radio applications. By employing a weak inversion biasing technique, the ring mixer can operate at a low LO drive level and low dc power while maintaining reasonable conversion gain performance. In addition, an IF transimpedance amplifier (TIA) buffer and wideband RF design are introduced to increase the operation speed of the mixer for MMW wireless Gigabit transmission. Using a 90-nm CMOS low-power process, the up-/down-conversion ring mixers are designed and fabricated based on the presented topology. The down-conversion ring mixer and up-conversion ring mixer exhibit flat measured conversion gain of -1 ± 2 dB and 0 ± 2 dB and dB from 40 to 110 GHz and 40 to 108 GHz, respectively. After biasing the transistors of the ring mixer core at weak inversion region, the presented down-conversion and up-conversion ring mixers can operate at low LO drive power, -2 and 0 dBm, respectively, even up to 100 GHz. For MMW wireless gigabit communication, gigabit binary phase-shift keying modulation signal test is successfully performed through a direct-conversion system in this work. The presented ring mixers are suitable for 60-GHz wireless personal area network, -E-band (71-76 GHz, 81-86 GHz, and 92-95 GHz) wireless fiber, and 77-GHz anti-collision radar applications.
20
1.25 Gbps wireless Gigabit ethernet link at 60 GHz-band
K. Ohata, K. Maruhashi, Masafumi Ito et al. · 2003 · 103 citations