A novel micropump design with thick-film piezoelectric actuation

Abstract

A new design for a silicon-based micropump is described. Passive cantilever valves are produced by boron etch stop and fusion bonding. Tests of these valves show good performance, as no flow could be detected in the reverse direction. Initial experiments on a thick-film screen printed piezoelectric membrane actuator were undertaken. A study of suitable inks for electrodes on different insulation layers on silicon yielded silicon dioxide and cermet gold ink as the most satisfactory combination. Deflection measurements of a mm PZT (lead zirconate titanate) - bimorph membrane gave movement at an applied voltage of 100 V.