Dental Materials Journal · 2005 · 35 citations · 13 references
DentistryProsthodonticsCeramicsDigital ProsthodonticsSurface Properties Of Dental MaterialsCrown MeasurementMachiningCad And Cam Dental CeramicsCervical Contour MorphologyComputer-aided Design (Cad And Cam) CrownsComputer-aided FabricationComputer-aided Manufacturing (Cad And Cam) CrownsDental CrownsMachining ProcessesMachining Surface Quality
The purpose of this study was to investigate the effect of repeated machining up to 51 times using the same diamond bur on machining accuracy of inner and outer surfaces of CAD/CAM (computer-aided designing and computer-aided manufacturing) machined ceramic crowns. The surface topography of machined crowns was examined using photographs. It was found that machining accuracy was not affected by the number of machining times. In all measuring points, the inner surface was machined to a dimension larger than the die model (i.e., increased gap), whereas the outer surface was machined to a dimension smaller than the crown model (i.e., smaller crown). Photo observation showed that cervical contour was machined in a clear, rounded form from 1st to 11th crowns.
13
Clinical fit of Procera AllCeram crowns
Klaus Boening, Burkhard H. Wolf, Annette Schmidt et al. · Journal of Prosthetic Dentistry · 2000 · 286 citations
Precision of fit: The Procera AllCeram crown
Kenneth B. May, Melinda M. Russell, Michael E. Razzoog et al. · Journal of Prosthetic Dentistry · 1998 · 268 citations
Five-year clinical evaluation of Procera AllCeram crowns
Agneta Odén, Matts Andersson, Ivana Krystek-Ondracek et al. · Journal of Prosthetic Dentistry · 1998 · 235 citations