Combustion Modeling of Split Injection in HSDI Diesel Engines

Jaeman Lim, Sangyul Lee, Kyoungdoug Min

Combustion Science and Technology · 2010 · 21 citations · 26 references

Concepts

Abstract

The second-injection ignition delay of HSDI diesel engines is generally shorter than that of the first injection. C. Hasse and N. Peters (2005 Hasse , C. , and Peters , N. 2005. A two mixture fraction flamelet model applied to split injections in a DI diesel engine. 30th Symposium (International) on Combustion , 2755–2762. [Google Scholar]) estimated the ignition delay of the second injection using 2-dimensional flamelet equations. However, simulation of 2-dimensional flamelet equations requires enormous computational time. Thus, to analyze the combustion phenomena of the split injection mode in HSDI diesel engines effectively, the 2-dimensional flamelet combustion model was modified. To reduce the calculation time, 2-dimensional flamelet equations were only applied near the stoichiometric region. If this region was ignited, the species and temperatures of other regions were changed to the steady-state solutions of 1-dimensional flamelet equations. Using this method, the calculation time for solving flamelet equations was reduced by 80% without any loss of calculation accuracy. The simulation results of the second-injection ignition delay were well matched with the experimental results in a precombusted vessel.

References

26