22—FACTORS AFFECTING THE THICKNESS AND COMPRESSIBILITY OF WORSTED-SPUN YARNS

W. J. Onions, Eric Oxtoby, Paul Townend

Journal of the Textile Institute · 1967 · 22 citations · 10 references

Concepts

Abstract

Yarn-thickness measurements have been made on a range of worsted-spun yarns, apparatus being used whereby loads ranging from I to 100 g could be mechanically applied over a length of 0–5 cm of yarn. A linear relation was found when the logarithm of the load was plotted against the logarithm of the yarn thickness, and this has been used to provide a ‘thickness index’ and a ‘compression index’ for each yarn examined. It has been shown that the two most important factors influencing yarn thickness and compression are the spinning twist and the fibre crimp, these being followed closely by the fibre length. Large differences were observed between the thickness and the compression of yarns spun to the same linear density from a range of different wool qualities, and these were largely due to the combined influence of the fibre crimp, length, and diameter. Considerable increases in yarn thickness and compression were also found between acrylic fibre yarns before and after bulking. Factors exerting less influence on yarn thickness and compression were the fibre diameter, the fibre cross-sectional shape, the different proportions in wool-Terylene blends, and the use of different processing systems; a large change in relative humidity had no effect on the thickness and compression measurements.

References

10