Circuit World · 2004 · 19 citations · 5 references
Natural SciencesMaterials EngineeringMaterials ScienceSemiconductor MaterialsSurface ScienceThin FilmsCoatingsCrystal PlanesMetalsSemiconductor Device MaterialsSemiconductor SurfacesSurface CrystallographyCrystal Plane OrientationCrystal Preferred OrientationDiffraction From Crystal PlanesElectrodeposited CoatingsOrientationsPre-treatmentTin DepositsX-ray Diffraction Analysis
A new pure tin process is described which produces a deposit with a crystal orientation combination that minimises whisker growth, particularly when used with a specific pre-treatment process. A recommended etch depth of minimum 2.5 μm has been shown to reduce whisker growth, particularly with thin (3 μm) tin coatings. Crystal orientation is determined by X-ray diffraction and the angles between adjacent crystal planes are calculated from the pattern produced. A minimum proportion of small angles is required for lowest whisker risk. Angles smaller than 22° have been shown to be critical. The predominant orientations of the deposits from new tin process are 101, 211, 112, and 312. This combination of orientations has 8 percent of angles in the critical range. A typical pure tin process with a high tendency for whiskering may have a texture of 431, 321, and 211 orientations, and this combination produces 65 percent of angles smaller than 22°.
5
Spontaneous growth mechanism of tin whiskers
D.N. Lee · Acta Materialia · 1998 · 426 citations
Spontaneous Growth Mechanism of Tin Whiskers
B Z Lee · Acta Metallurgica · 1998 · 407 citations