Characterization of the response of fibre Bragg gratings fabricated in stress and geometrically induced high birefringence fibres to temperature and transverse load

Edmon Chehura, Chenchun Ye, Stephen E. Staines, Stephen W. James, Ralph P. Tatam

Smart Materials and Structures · 2004 · 101 citations · 20 references

Concepts

Abstract

The transverse load and temperature sensitivities of fibre Bragg gratings (FBGs)
\nfabricated in a range of commercially available stress and geometrically induced
\nhigh birefringent (HiBi) fibres have been experimentally investigated. The
\nwavelength reflected by the FBG in each polarization eigenmode was measured
\nindependently and simultaneously using a custom designed interrogation system.
\nThe highest transverse load sensitivity, of 0.23 ± 0.02 nm/(N/mm), was obtained
\nwith HiBi FBGs fabricated in elliptically clad fibre. This was higher than for
\nany other HiBi fibre, which, coupled with the small diameter of the fibre, makes
\nit a good candidate for an embedded or surface mounted strain sensor. The
\nhighest temperature sensitivity of 16.5 ± 0.1 pm °C-1, approximately 27% greater
\nthan any other fibre type, was obtained with the HiBi FBG fabricated in Panda
\nfibre. HiBi FBG sensors fabricated in D-clad fibre were the only ones to exhibit
\nidentical temperature sensitivities for the slow and fast axes (11.5 ± 0.1 pm °

References

20