JAWRA Journal of the American Water Resources Association · 1988 · 16 citations · 5 references
EngineeringCivil EngineeringGeotechnical EngineeringHydraulicsSurface EngineeringChannel DesignChannel MorphologyFlow BehaviorFlow ResistanceRiver HydraulicsBed FrictionBed ResistanceChannel RoughnessChannelsFlume ExperimentsFriction FactorManning's EquationRoughness
ABSTRACT: A series of flume tests were conducted to determine the flow resistance of angular shaped riprap in steep channels. Flow resistance was expressed in terms of the Darcy‐Weisbach friction factor and the Manning's roughness coefficient. Prototype channels of 4 ft. (1.2 m) and 12 ft. (3.7 m) in width were constructed at slopes ranging from 0.01 to 0.20. The channel beds were comprised of angular riprap of median diameters of 1, 2, 4, 5, and 6 inches (2.59, 5.59, 10.41, 12.95, and 15.75 cms). The Darcy‐Weisbach and Manning's coefficients were determined for each test condition prior to bed failure. The resulting Darcy‐Weisbach coefficients were related to the channel energy gradient and the bed relative submergence for highly turbulent flow. Also, Manning's roughness coefficients were related to the product of the median stone diameter and energy gradient. Because of the angular shape of the riprap and the wedging and/or packing of the bed materials, the resistance to flow was found to exceed the flow resistance values predicted by previous studies. Expressions were presented for estimating the resistance to flow for angular riprap in steep channels.
5
Hydraulics of High‐Gradient Streams
Robert D. Jarrett · Journal of Hydraulic Engineering · 1984 · 478 citations
Flow Resistance Estimation in Mountain Rivers
James C. Bathurst · Journal of Hydraulic Engineering · 1985 · 376 citations
Estimating Average Velocity in Gravel-Bed Rivers
Dale I. Bray · Journal of the Hydraulics Division · 1979 · 240 citations
A GENERAL THEORY OF FLOW IN ALLUVIUM.
G LACEY · Journal of the Institution of Civil Engineers · 1946 · 53 citations