Advanced Materials for Optics and Electronics · 2000 · 28 citations · 0 references
Natural SciencesMaterials EngineeringMaterials ScienceElectrochemistryElectronic MaterialsSemiconductor DevicesCathode MaterialsElectrical CharacterizationElectrode MaterialsLuminescent MaterialsOrganic Electronic MaterialsOrganic SemiconductorsCharge InjectionConductionDoped Electrode MaterialsElectroluminescenceElectroluminescent MaterialsHole TransportHole Transport LayersLinear Models
We have attempted to investigate the non-linear behaviour in the characteristics of organic electroluminescent devices (OELDs) fabricated with polyimide and an organometallic complex as a hole transport layer (HTL) and an emission layer, respectively. The thickness of the polyimide HTL and the kind of metal cathode were varied to study the mechanism of the charge conduction and the electroluminescence (EL). The conventional linear models well explained the voltage-dependent charge injection and the current-dependent EL. New non-linear models proposed here predicted the characteristics almost completely, even though the physical meaning of the included parameters was not clearly defined. The OELD with the Mg cathode showed lower luminous efficiency in the high electric field than that with the Al cathode because of poor adhesion between Mg and Alq3. The maximum luminous efficiency was ca. 1.2 lm/W at 700 cd/m2 in the case of the Al cathode. The emission colour did not change for the OELD with the Mg cathode irrespective of the polyimide HTL, whereas the OELD with the Al cathode and the thick HTL showed a red-shifted EL of ca. 10 nm. Copyright © 2000 John Wiley & Sons, Ltd.