Selective H<sub>2</sub>S Gas Sensing With a Graphene/n-Si Schottky Diode

Ali Fattah, Saeid Khatami

IEEE Sensors Journal · 2014 · 27 citations · 18 references

Concepts

Abstract

In this investigation, a novel selective gas sensor for detection of H <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> S gas is proposed based on graphene/n-Si Schottky junction. The sensor's structure is based on a Schottky junction fabricated by mechanical deposition of highly oriented natural graphite on top of an n-type <;100> silicon substrate. The variation in the forward bias current-voltage characteristics of the diode for different gas concentrations and different temperatures are indications of the gas sensing capability of the proposed sensor. The fabricated graphene-based gas sensor shows good selectivity, reproducibility, and fast response. Considering electrochemical impedance spectroscopy, the sensitivity variation of the sensor in a specific range of frequencies is different for each gas ambient. The response time of about 20 s under the applied voltage of 1 V and 100 ppm of H <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> S gas ambient is obtained and becomes shorter as the temperature increases. Because of the special structure of the graphene, adsorption, and desorption of the gas occurs fast. Therefore, graphene-based Schottky diodes seem suitable for gas sensing applications.

References

18