Middle East Oil Show · 1995 · 19 citations · 0 references
EngineeringEarth SciencesGeologyPetrophysicsReservoir CharacterizationReservoir EngineeringDual-porosity ModelingFluid SaturationPetrophysical AnalysisPetrophysical InterpretationPorosity AnalysisPorosity CharacterizationCarbonate Rock WettabilityCementationCementation FactorPore GeometryPore Geometry EffectsPorosity In CarbonatesSaturation ExponentSaturation In Carbonate Reservoirs
Summary The giant carbonate reservoirs in the Middle East are free of clays (e.g. Mishrif, Thamama and Arab reservoirs to mention but a few). This blessing for the interpreters is more than counter-balanced by a host of other parameters that make shaly-sand interpretation look like child play. The pore geometry in carbonates introduces variations in the cementation factor m (porosity exponent) and the saturation exponent n. It is also believed that most of the carbonates exhibit mixed wettabilities, with the micropores, which retain the original formation water, being water wet, and the macropores, which are invaded by the migrating oil in the majority of cases, being oil wet. There are ample log evidence to suggest that in some cases the presence of microporosity dominates the resistivity measurements, giving apparent saturation computations that are inconsistent with the production data(e.g. dry oil production from zones with computed Sw greater than 70%). At the least, a dual porosity model would be needed to describe the system in full. However, in the absence of data to solve for a dual porosity system, the parameters m and n are normally manipulated to obtain saturation values that are closer to the observed test results. This study simulates the effects of microporosity on the computed values of saturations. A dual porosity system is assumed, with a range of parameters for the two pore systems. The interaction between the macro and micro pore systems was also varied using different mixing laws. The results demonstrate that the presence of micropores can have a large effect on the computed values of saturation. A tool that measures microporosity will be invaluable in carbonates, with such a measurement becoming a standard service like the density-neutron combination.