Journal of Thermophysics and Heat Transfer · 1999 · 23 citations · 16 references
EngineeringCivil EngineeringMechanical EngineeringHeat TransferThermal AnalysisTransport PhenomenaHeat FlowHeat Transfer AnalysisHeat Transfer FundamentalsHeat Transfer In FluidsHeat Transfer ModelingThermal Boundary LayersConvectionConvection RegimesForced ConvectionHeat Transfer In ChannelsMixed ConvectionNatural ConvectionNusselt NumberPeclet Number
The experimentalresults ofmixed-convectionheat transfer in a vertical packed channelwith asymmetricheating of opposingwalls are reported. The experiments were carried out in the range of 2 < Pe < 2200 and 700 <Ra < 1500. The measured temperature distribution indicates the existence of a secondary convective cell inside the vertical packed channel in the mixed-convection regime. A correlation equation for Nusselt number in terms of Peclet number Pe andRayleigh numberRawas obtained from experimental data. A plot ofNu/Pe1/2 vs Ra/Pe exhibits the transition of heat-transfer results from the natural convection limit to the forced convection limit. The following three convection regimes exist: natural convection regime, 105 <Ra/Pe; mixed-convection regime, 1 <Ra/Pe < 105; and forced convection regime, Ra/Pe < 1. Nomenclature Acs = cross-sectionalarea of the channel Ah = surface area of the heated wall B = shape factor de ned in Eq. (5) cp = speci c heat of Freon-113 (R113) dp = sphere diameter H = plate separation of the channel K = permeability of the packed bed de ned in Eq. (7) k f = thermal conductivityof Freon-113 km = media effective thermal conductivity ks = thermal conductivityof chrome steel Nu = Nusselt number de ned in Eq. (4) Pe = Peclet number de ned in Eq. (3) qw = heat ux at the heated wall Ra = Rayleigh number in Eq. (2) Tc = temperature of the cooled wall Th = temperature of the heated wall Ti = uid temperature at inlet of the test section u i = uid velocity at inlet of the test section ®m = media thermal diffusivity,®m D km=.cp / f ¯ = thermal expansion coef cient 1T = temperature difference,1T D Th ¡ Tc ¸ = thermal conductivity ratio of k f and ks º = kinematic viscosity of Freon-113 = density of Freon-113 ’ = porosity of the packed bed
16