Characterization of detectors for extreme UV radiation

Frank Scholze, R. Klein, Ralph H. Müller

Metrologia · 2006 · 41 citations · 13 references

Concepts

Abstract

Accurate measurements of the radiant power and other quantities are a prerequisite for the development and optimization of suitable radiation sources for extreme ultraviolet (EUV) lithography. Photodiodes are established as easy-to-operate detectors also in the EUV range. The calibrations at the Physikalisch-Technische Bundesanstalt are based on the comparison of the detector to be calibrated with the cryogenic electrical substitution radiometer as a primary detector standard using monochromatized synchrotron radiation at the soft x-ray radiometry beamline in the spectral range from 1 nm up to 25 nm. The spectral responsivity is measured with a relative uncertainty of 0.3% or better. For the dissemination of these high-accuracy calibrations, we investigated the stability and linearity of silicon n-on-p junction photodiodes under intense EUV irradiation in ultra-high vacuum. The maximum current in linear operation (1% relative saturation) depends on the size of the photon beam and ranges from about 3 mA for a 6 mm photon beam diameter to 0.2 mA for a 0.25 mm diameter spot. Diodes with diamond-like carbon or a TiSiN top layer proved to be stable up to a radiant exposure of about 100 kJ cm−2. Furthermore, examples of the calibration of spectrally and spatially resolving radiometric tools for EUV-source characterization are presented.

References

13